Hi-Yield Stump Remover
Click To Enlarge
- Item #: 3222132015
1.5 lbs.
An easy way to remove tree stumps. Works by decomposing the wood of tree stumps, leaving them porous right down to the root tip. Allows for easy removal or burning of the stump. Harmless to vegetation.
Directions For Use:
Drill several sets of such holes for stumps larger than 12" wide. Pour approximately 1/4 lb. Hi-Yield Stump Remover into each hole. Fill each hole with water. Allow to stand from 4-6 weeks. If stump is to be burned, refill holes with kerosene or fuel oil. Allow sufficient time for the liquid to be completely absorbed into the stump. Then apply a slight amount of kerosene over stump and ignite. Or burn charcoal on top of stump or around base to start stump burning. The stump will burn in a smoldering, red glow, clear down to the roots, disintegrating the stump into ashes.
Drill several sets of such holes for stumps larger than 12" wide. Pour approximately 1/4 lb. Hi-Yield Stump Remover into each hole. Fill each hole with water. Allow to stand from 4-6 weeks. If stump is to be burned, refill holes with kerosene or fuel oil. Allow sufficient time for the liquid to be completely absorbed into the stump. Then apply a slight amount of kerosene over stump and ignite. Or burn charcoal on top of stump or around base to start stump burning. The stump will burn in a smoldering, red glow, clear down to the roots, disintegrating the stump into ashes.
